How to change is as follows.
1. After changing SCAN NAME DEF from OFF to <ON>, press IRIS OPEN KEY.
2. How to change the SCAN name is the same as “1.2 CAMERA NAME DISPLAY”.
■ PAN START POS
It sets up the initialized location of SCAN.
Controllable angle is 0~ 360° , 0 ~ -360°.
How to set up is as follows.
1. Press IRIS OPEN KEY in PAN START POS.
PAN Shift : LEFT, RIGHT KEY
2. After shifting to a desirable position, press IRIS OPEN KEY.
■ PAN END POS
It sets up the terminated location of SCAN.
Controllable angle is 0°~ 360° , 0°~-360°.
How to set up PAN END POS is the same as “PAN START POS”.
■ TILT POS
It sets up TILT angel in SCAN.
Controllable angle is 0~ 90° .
How to set up is the same as “PAN START POS” but UP, DOWN KEY should be used for TILT operation.
■ SCAN SPEED
It sets up SCAN Speed..
The speed can be set up in 5°/S(Slow) ~ 20°/S(Fast).
* Caution *
The value of Brightness, WDR, ATW is applied to the setting values on the OSD.
It is to memorize the paths operated with the joystick operation and reenact them.
Comentários a estes Manuais