Vision VISION-64 Guia do Utilizador descarregar pdf (Página 132)

132 Vision Software User's Guide

To change any of the parameters relative to the driver you are using,

you must first click on the driver name under the Avail Drivers:

section.

Version Number: This is the version number of the driver.

Buffer Size: This is not used with the Vision Serial Controller.

Priority level: This is a Windows number that tells Windows how important

the output to the controller is.

Serial port: This is the serial port in which the Vision Serial Controller is

hooked to.

Note: For Vision to work properly, the serial port must be

installed, working correctly, and set up properly. For more information on

setting up the serial port, see Appendix B - Troubleshooting in the back of

this manual.

Ramp Ctrl and Cut Control are not used with the Vision Serial Controller

or the VE-810.

Table: See picture below.

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 186 187

Sem comentários

Vision VISION-64 Guia do Utilizador Página 132